Some double-coated fleeces may need an additional pin-drafting to thoroughly
blend the various lengths of fiber, in order to properly spin on our machines.
Where the volume of undercoat to outercoat is nearly 50-50, there's usually no
problem, but in fleeces where the proportion is unbalanced, an extra pindrafting
may be needed. If I decide it's necessary for spinning on our equipment, an extra
$2.50 per finished pound of yarn will be charged for this additional pindrafting.
*Breeds frequently affected include Icelandic, Shetland, Jacob, Karakul, and Navajo-Churro.
Some blends may also be affected such as wool/silk, wool/mohair, etc.
Fiber length: Assessing your fiber for spinning on our machines includes looking at its length. Currently we can spin lengths from 3.5 inches to 11 inches. Longer than that won't draft properly, and shorter than that will fall apart in the drafting zone. If in doubt, call to discuss your fiber before you pay to ship it to us. The spinning machines that we use are called "long staple spinners".
If I cannot spin your fiber (all types), after it has been processed for spinning, because of its length (short or long), it will be returned to you as pindrafted roving, and charged as such. If I decide before processing that it won-t spin, I will turn the fiber into roving unless you specify otherwise in the "Special comments or instructions" section on your order form.
If you want 100% alpaca or llama yarn and specify that no wool can be added for spinning, and I believe I cannot spin it in that condition, I will return it to you as roving and charge you for processing into roving, unless you specify on your order form to send it back raw.
Prices are based on the finished weight of the yarn and include all processing needed to get it to that stage (except the "small batch" fee of $5 per pound on batches with incoming weight under 5 pounds). Keep in mind that you can lose up to 8 ounces between the carding machines and the spinning set up. Seldom is there that much loss, but you'll have the same loss whether it's a 10-pound run or a 100-pound run. We produce a semi-worsted yarn.
To repeat, these prices are all inclusive. All processing needed to get from raw fiber to finished yarn is included in these prices.
Single ply worsted - $22.00 per pound
2-ply worsted or bulky weight - $22.00 per pound
2-ply sport or 3-ply worsted - $24.00 per pound
2-ply fingering, 3-ply sport, or 4-ply worsted - $26.00 per pound
3-ply fingering - $28.00 per pound
There will be a set-up fee of $15 per batch for yarn orders that need to be a specific ypp.
Add $5 per pound on batches of incoming fiber that weighs under 5 pounds incoming weight, except suri alpaca.
Add $8 per pound on batches of incoming suri alpaca fiber that weight under 5 pounds incoming weight.
Add $3 per pound to each price if the yarn is made with 50% or more exotic fibers (see listing of exotics on our home page).
100% alpaca or llama, or blends of these fibers with less than 15% wool added, add $5.50 per pound. The reason is alpaca and llama take about twice as long to card and pindraft as other fibers, unless at least 15% wool is added.
Alpaca and llama with at least 15% wool added is charged as a "regular" exotic, $3 per pound added to spinning charges.
Coning and Skeining:
Yarn can be put up into skeins (normally 250 yards unless specified otherwise) or cones. Cones are $1.00 each.
no charge except for cones at 30 cents each.
Counted skeins (known yardage) $2.50 per pound. Skeins under 150 yards add $1.00 per pound
Washing skeins: $2.50 per pound